Project Description

  • extrusion granulator
  • extrusion granulator

Roller Extrusion Granulation Machine

DZG series of roller extrusion granulator is a new type of granulation equipment. Zhengzhou Fusmar Machinery is a professional extrusion granulator manufacturer.

Whatsapp:+8615838279423

Email: info@fusmarmachinery.com

Send Inquiry

DZG series of roller extrusion granulator is a new type of granulation equipment. Zhengzhou Fusmar Machinery is a professional extrusion granulation manufacturer. This article will introduce this machine in detail.

Roller Extrusion Granulator Introduction

With years of production experience, Fusmar Machinery manufactured roller extrusion granulation machine based on the original two-roller extrusion granulation. It can widely use in the fertilizer processing industry, feed production units, and chemical industry for granulation, production, and processing of powder materials.

granulation machine

Characteristics Of The Roller Extrusion Granulator

  1. This machine adopts no drying process production, granulating at room temperature and forming in one time. On the other hand, it has the characteristics of low investment and good economic benefits.
  2. The structure of the machine is granulating, forming, screening into one. So that it has a beautiful appearance, simple operation, low energy consumption characteristics. The main parts, such as the roll, are made of a new type of metal with the characteristics of corrosion resistance, wear resistance,and impact resistance. Which DZJ-Ⅱdouble input shaft pelletizing machine not only has the above characteristics, our company to the frame part also carried on the upgrading transformation.
  3. The bearing frame body chooses the quality good anti-corrosion casting as the whole part, causes it to have the stability good characteristic, then, may greatly enhance the rolling bearing, and the big shaft service life. Double input transmission mode adopted in the transmission part, which not only improves the input power ratio but also guarantees the lubrication and sealing performance of the transmission gear. This machine has the advantages of compact structure, good stability, good tightness, low noise, and so on. Otherwise, it convenient operation maintenance. So that, after the new machine appears on the market won the high praise of extensive user.
  4. Wide adaptability of raw materials. This machine not only can use for fertilizer, feed, chemical industry granulation, and especially for rare earth, metallurgy, coal, biological agents, environmental protection engineering also has good applicability.It is also the promotion project of environmental protection engineering!

granulation machine

The Main Technical Parameters

parameters data

There are various models for the roller extrusion granulator, which can be purchased according to the needs of the user’s output and can also customize.

The Working Principle Of Roller Extrusion Granulator

The working principle of the series of roller extrusion granulators is that a motor-driven the pulley, and then the transmission belt transmitted through a reducer to a pair of two high-pressure roller bodies with a sliding mold housing for relative work. The two rollers of DZJ-I extruder interact with each other by a pair of split gears. Otherwise, the two rollers of DZJ-II extruder machine are directly driven by two output shafts on a special reducer.

The purpose of extrusion molding. During the production, the raw material enters the hopper, relatively extruded by the high-pressure roller body, and flows to the crushing forming studio at the lower part of the roller body after demolding. The power of the crushing forming is that the sprocket of the active pressing roller shaft driven through the chain to a pair of crushing rollers for relative movement, and then crushed and sieved in the working chamber. And then the finished pellets pass through the screen to the discharge chute and out of the machine.

granulation machine

Summary Of Structure

Rack section: All the workpieces of the machine are all mounted on the rack.

The drive connection parts: Motor, pulley, V-belt, reducer, chain, sprocket, coupling and so on.

The head part: Including a bearing frame body, a pair of high pressure die roll skins, two shafts and so on.

Broken studio: There are crusher roller bearing frame, crushing roller, screen mesh and so on.

Zhengzhou Fusmar Machinery has expanded business in the whole world. We are dedicated to creating value for all of our customers.

Get In Touch With Us, Our Sales Engineer Will Contact You ASAP!